Mackie Lounge Pack | DJ Packages

Mackie Lounge Pack

Regular Price $9999.99
Our Price $6449.99

Two Mackie SR1522Z Powered Speakers
- Bi-Amplified, with 400W RMS low-frequency and 100W RMS high-frequency amplifiers
- Built-in Active circuitry provides precision crossover, electronic time correction, phase alignment and equalization
- 44mm (1.75") titanium dome compression driver with optimized symmetric phase plug
- Dual 381mm (15") LF woofers with high temperature voice-coils
- Wide-dispersion, ultra-low distortion, high frequency horn design
- 133 dB SPL @ 1kHz / 1 meter
- Frequency Response: 43Hz to 20kHz
- Complete electronic and component protection circuitry
- Weight balanced with carrying handles for easy portability
Two Mackie SWA2801Z Powered Subwoofers
- 800-watt dual 18 in. Active subwoofer system
- 2 precision 18 in. woofers with high temperature voice coils
- Internal 800-Watt continuous power FR Series high-current amplifier
- Onboard Active electronics provide equalization and high-pass filter for use with full-range loudspeakers
- Peak SPL: 136dB @ 1 meter
- Frequency Response: 33Hz?200Hz
- Signal present and limit LEDs
- 13-ply Baltic Birch enclosure finished in black splatter paint
- Top and side mounted pole receptacles
- Cast aluminum top & side handles
- Attached casters for easy transport
One Furman M8D Power Conditioner
- Filtration of noise from radio frequencies and electromagnetic interference
- Standard level of surge suppression
- Digital LED voltmeter to display incoming line voltage
- Dual pull-out rack lights with dimmer control
- 8 rear panel outlets
- Sturdy one rack space design
- 15 amp capacity with circuit breaker
One DBX 120A Sonic Maximizer
- Subharmonic synthesis creates new bass waveform to enhance bass audio material
- Ideal for nightclubs, dance mixing, theaters, film/tv, studios and live
- Individual control for two ranges of subharmonic frequencies
- Separate low frequency boost circuit
- Separate subwoofer output
- 1/4´´ balanced inputs and outputs
- RCA input connectors
- Front panel LEDs that show crossover status and synthesis activity
- Patented circuitry ensures that mid and high frequencies are not affected
- Built-in crossover with choice of 80Hz or 120Hz crossover point
One 123djAR8 Case
- 8-SPACE FULLY EXTRUDED RQUIPMENT RACK 22" USABLE DEPTH
- FRONT & BACK EIA TAPPED STEEL RACK RAILS
- ½" BLACK POLYDURA LAMINATED PLYWOOD CONSTRUCTION
- REMOVABLE FULLY EXTRUDED FRONT & BACK DOORS
- TWO HEAVY DUTY RECESSED SPRING LOADED HANDLES PER SIDE
- HEAVY DUTY RECESSED RIVETED HARDWARE AND CLAMPS
- LOOP LOCK RECESSED LATCHES WITH PADLOCKS SUPPLIED
- HEAVY DUTY STACKABLE CHROME BALL STYLE CORNERS
- 4 SHOCK MOUNT RUBBER FEET
- (12) 10/32" RACK MOUNT SCREWS INCLUDED
- DIMENSIONS: 18" (H) X 22" (W) X 26" ( D)
ALL CABLES INCLUDED!!