SX3 K12 Complete Pack

Enhanced vocals
Whether you're performing with MCs, singers or guest speakers, 3 people can entertain the crowd at the same time via the 3 Mic inputs. Ensure crystal-clear speech with 3-band EQ, low-cut filter, compressor and reverb control on each. Enhance vocals with Sound Colour FX and Serato DJ Pro FX.

Dual USB ports
Connect 2 computers at the same time for seamless DJ transitions, back-to-back performances or as a backup computer in case your laptop crashes.

Professional interface
With a layout inherited from our flagship Serato controllers, the DDJ-SX3 feels familiar to use. Featuring 4 inputs, connect to CDJs, analogue turntables and use as a stand-alone DJ mixer. Plug in various speakers via the XLR and RCA Master Out and TRS jack Booth Out terminal.

Performance Pads
Use the large multicoloured Performance Pads to instantly trigger 11 Serato DJ Pro features. Watch their colours and illumination change to show the selected pad mode and playing status.

Low-Latency Jog Wheels
We've reduced the latency of the jog wheels for even smoother scratching than its predecessor. Optimised for a perfect scratch response, the illuminated cue point markers with cue countdown give you effortless control without needing to look at your laptop.

Expansion Packs enabled
Pitch 'n Time DJ and Serato Flip Expansion Packs are included. Use advanced features like Key Shift, Key Sync, Flip, Pitch Play and more to mix tracks smoothly.

Sound Colour FX
Add texture and unique sounds to your mixes using the popular Filter, Echo, Jet and Noise FX from the DJM series mixers.

Slip Mode
Keep tracks playing muted during live edits such as loop, scratch or reverse. Release the jog wheel and the track comes back at exactly the right place.

Clear audio
The mic input circuit produces clear audio without distortion to ensure crystal-clear sound even at high input levels.

Needle search
Simply touch the pad to instantly jump to a specific section of a track.

Serato Flip
Part of the included expansion packs, Serato Flip lets you make custom edits of your tracks and play them back at a touch. Get even more creative by skipping or repeating sections on the fly.

Pitch 'n Time DJ
Pitch 'n Time gives you the creative freedom to shift and sync the key of your tracks, as well as to speed up and slow down your tracks to extreme tempos. Enjoy the ability to mix, cut and scratch while maintaining perfect key and audio quality.

ProX Pioneer DDJ-SX / DDJ-SX2 Controller Flight Case w/Laptop Shelf & Wheels

The XS-DDJSXWLT Flight case designed by ProX Cases is made with the highest quality material and workmanship to give you the ultimate security for your SX controller. If you have a passion for your gear and want to keep it safe at all times, this case will perform at the highest level every time.

The XS-DDJSXWLT with sliding Laptop Shelf is constructed with our rugged signature 3/8" Gig-Ready Series Plywood, durable rubber wheels, reinforced steel ball corners, as well as recessed steel padded handles and latches. There is additional space for cables and small accessories in the back and underneath the unit for convenience, as well as a removable front panel for you to access front input jacks easily. The front removable panel allows for easy access to the front controls and headphone/mic jacks.

For the safety of your equipment, do not attempt to transport with any gear stored on the sliding shelf and be aware that the shelf can be removed when slid out to its furthest point.

ProX Goes Green: The durable hard rubber foams used in our cases contain 70% recycled content. Of that 70%, 80% of it comes from recycled plastic bottles and the remaining 20% from recycled post-industrial material. At ProX we strive to make the world a better place!

XS-DDJSXWLT Features:

• ATA-300 Style Gig Ready Flight Road Case.
• Sliding Laptop Shelf.
• Easy locking fit and tongue.
• High-density foam interior support & casing.
• Spring action recessed handles.
• Recessed spring action Handles per Side.
• Heavy and powerful steel ball corners.
• Dual anchor rivets.
• Signature Series Laminated 3/8" plywood.
• Black on Black Digital honey Comb exterior design.
• Industrial Recessed butterfly twist lock latches that can be padlocked.
• Industrial Grade Rubber Feet.
• Cable access hole with removable emblem cover.
• ProX Limited Lifetime Warranty.

Ultimate Support JS-TS50-2 Tripod Speaker Stand Pair with FREE Carry Bag

Speaker stands need to be both sturdy and easy to move. The Speaker Stand (Pair) fits on both accounts, giving you a stable environment in which to elevate your speakers to optimum height. Crafted from aluminum and powder-coated for finish durability, these stands will give you years of service. Each stand can hold up to 120 lbs. The strong telescoping and leg collars provide a stable stand for your speakers. The height adjustment collar has a safety pin for extra security. The JS-TS50-2 also includes a handy carry bag for FREE!

Ultimate Support JS-TS50-2 Tripod Speaker Stand Features:

• Part Name: JS-TS50-2.
• Long-lasting aluminum construction.
• Durable powder-coated finish.
• Tripod base is very stable and sturdy.
• Stand is height-adjustable.
• Carrying bag included for FREE!
• Holds up to 120 lbs.
• Height 46.5" - 81.5".

QSC K12.2 features at glance:

• Best in class audio performance.
• 2000 Watt Class-D amplifier module.
• Factory Presets and savable/recallable Scenes for commonly-used applications such as Stage Monitor, Dance Music, Musical Instrument Amplification, Hand-held Microphone and more.
• Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contours.
• Intrinsic Correction tuning and loudspeaker management.
• DMT (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area (75-, 90-, 105-degree, K12.2, K10.2, K8.2).
• Refined, professional appearance looks great in any application.
• Rugged ABS enclosure for long life and lasting durability.
• Deployment in either main PA or floor monitor position.
• Dual pole cup mounts (straight-firing and 7.5 degree down-tilt).
• M10 fittings for flown applications.
• Optional security panel prevents unauthorized tampering of controls.
• 6-Year Warranty with product registration.

The QSC K.2 Series represents the best-in class loudspeaker for today's demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.

Advanced Power and DSP:
The 2000 Watt power module delivers ample burst and continuous power for the loudspeaker's premium drivers. It has been designed with very low-noise fan cooling, enabling the enclosures to be used in settings where background noise must be kept to a minimum. Carefully tailored, subtle and sophisticated dynamics processing is used to protect the drivers from damage and the performance from distortion.

Presets:
The user may select may select from an extensive list of factory preset EQ contours including Live, Dance, Monitor, and many more.

Scenes:
Savable and recallable Scenes can store information like user EQ, Delay, and input configuration settings.

Inputs:
A pair of balanced combo XLR/F plus 1/4" TRS connectors with independent gain control are provided. The first is equipped with selectable MIC/LINE (Microphone or Line) level input while the second offers selectable HI-Z/LINE (High Impedance or Line) level input, specifically for musical instruments. Both inputs are connected directly to a pair of XLR/M throughput connectors so that the signals may be "daisy-chained" to another audio device. A 3.5 mm TRS input jack with independent gain control is also provided for connection of sources such as smart phones, computers, and MP3 players.

Outputs:
In addition to the two throughput XLRs, a line-level output with the mixed signal from all inputs is also provided. (An optional security cover (K-LOC) may be installed to prevent unauthorized tampering of settings).

Coverage:
DMT (Directivity Matched Transition) design matches the coverage angle of the woofer at the cross-over frequency with the horn pattern to ensure uniform response across the coverage area. Intrinsic Correction techniques are also employed ensuring smooth power response from the loudspeaker. The result is an extremely accurate loudspeaker that behaves well in a wide range of acoustic spaces with little or no equalization.

Flexible Design:
Each model is housed in a rugged ABS enclosure with a professional yet unobtrusive appearance that is at home in any application. Each model can be utilized in either main PA or floor monitor applications, while ergonomic handles and a heavy-duty steel grille with fabric lining further enhance overall appearance and functionality. The dual pole cups allow a zero or 7.5 degree downward tilt when deployed on a pole. This allows for more even coverage across the listening area and less problems due to rear wall reflections. For suspended applications, integrated M10 fittings with a single pullback are included to accommodate M10 eyebolts. An optional yoke mount accessory is also available for permanent installation to walls and ceilings or for temporary attachment to truss (requires 3rd party hardware).

Applications
The K.2 Series has been primarily designed for portable audio reinforcement. This includes a variety of uses in reinforcement for entertainers and presenters. All are designed to perform well on their own in full-range audio. They can be used singly, in stereo pairs or in distributed or delayed systems. They perform extraordinarily well as both main reinforcement systems and as floor monitors.

All three models are equipped with two 35 mm pole sockets that allows use on a speaker stand or on a pole over a subwoofer. (The subwoofer must have a 35 mm pole socket capable of supporting the loudspeakers.) One socket is for vertical mounting, the other for tilting the enclosures down 7.5 degrees.

In addition, the K.2 Series have features designed for various suspension methods. They feature two M10 threaded inserts for suspension with eyebolts and a built-in pull-back ring. There are also yoke accessories (model numbers: K8.2 YOKE, K10.2 YOKE, K12.2 YOKE) for each model that can mount either to the sides of the cabinet or to the top and bottom. These yokes allow for rigid mounting to structures and rotation of the speaker system.

Pioneer DJ DDJ-SX3 4-channel DJ Controller for Serato DJ Pro Specifications:

Main Features
Plug and Play	Yes
DVS upgrade ready	Yes
Included DJ Software	Serato Flip Serato Pitch 'n Time
Compatible DJ Software	UnlocksSerato DJ Pro
Software System Requirements	Mac: macOS High Sierra 10.13 (updated to the latest version) macOS Sierra 10.12 (updated to the latest version) OS X 10.11 (updated to the latest version) Windows: Windows 10, 8.1, 7 (the latest service pack) CPU: Intel processor Core i7, i5, i3: 1.07 GHz or above  Memory: 4 GB or more of RAM
Width	26.14 in
Height	2.77 in
Depth	13.95 in
Weight	13.45 lb
Soundcard	24 bit/44.1 kHz
Frequency Range	20 - 20000 Hz
Distortion	< 0.003 % (USB) < 0.005 % (LINE)
Performance Control
Channels	4
Deck Control	4 / Dual
Jog Wheel	132.5 mm durable aluminium jog wheel (center illumination)
Serato DJ FX powered by iZotope	Yes
Colour FX	Echo Jet Noise Filter
FX Parameters	4knob x 3button
Sampler	16slot x 4bank
Hot Cues	8
Manual Loop	Yes
Autoloop	Yes
Slip Mode	Yes
Needle Search	Yes
Native Serato Flip	Yes
Talkover Function	Yes
EQ Isolator	Yes
Fader
Fader Start	Yes
Crossfader Curve Adjust	Yes
Terminals
Inputs	2 LINE (RCA) 2 PHONO/LINE (RCA) 1 MIC (XLR) 1 MIC (XLR/Jack Combo) 1 MIC (1/4 inch Jack)
USB	2 USB B ports
Outputs	1 MASTER (XLR) 1 MASTER (RCA) 1 BOOTH (1/4 inch Jack) 2 HEADPHONE MONITOR (1/4 inch Stereo Phone Jack, 3.5mm Stereo mini-jack)

ProX XS-DDJSXWLT Specifications

Dimensions
30.50"L X 20.00"D X 9.50"H
Weight: 38.00 lbs

Shipping Dimensions
32.00"L X 22.00"D X 10.50"H
Weight: 40.00 lbs

Ultimate Support JS-TS50-2 Specifications

Product Name: JS-TS50-2
Part Number: 17318
Height: 46.5" - 81.5"
Base Diameter: 47"
Load Capacity: 120 lbs.
Telescoping Tube: 1 3/8" (35mm)
Weight (Per Stand): 4.2 lbs.

QSC K12.2 Specifications

Configuration: Multi-purpose, 2-way powered loudspeaker
LF Transducer: 12" (305 mm), cone
HF Transducer: 1.4" (35.6 mm) titanium diaphragm compression driver
Frequency Response (-6 dB): 50 Hz - 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz
Nominal Coverage Angle: 75? Axisymetric
Maximum Rated SPL1: 130 dB @1 M, peak 124 dB @ 1 M, continuous
Amplifier: Class D
Peak: 1800 W (LF), 225 W (HF)
Cooling: Low-noise, variable speed fan

Controls:
Power
3 x Level
Rotary encoder (push)
2 x selection buttons

Indicators:
Monochrome LCD Display 1.75" x 1" (45 mm x 25.4 mm)
2 x Power LED (front and rear)
3 x Input Signal LED
Input A Mic selected LED
Input B Hi-Z selected LED
Limiter active LED

Connectors:
2 x locking XLR/F 1/4" combo (Mic/Line Input and Hi-Z/Line Input
1 x 3.5 mm TRS (Stereo Input)
2 x XLR/M (Loop-thru Output)
1 x XLR/M (Mix Output)
1 x locking IEC power connector

AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption 1/8th Power: 100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A
Enclosure Details: Impact Resistant ABS
Attachment Points: 2 x M10 threaded inserts plus Pull-Back
Color: Black (RAL 9011)
Grille: 18 Gauge powered coated steel, internal cloth lining

Dimensions (HxWxD):
602 x 356 x 350 mm
23.7 x 14 x 13.8 in
Net Weight: 17.7 kg (39 lbs
Shipping Weight: 21.7 kg (47.8 lbs)
Regulatory: CE, WEEE, UL, China RoHS, RoHS II, FCC Class B

Optional Accessories:
K12 Tote, K12 Outdoor Cover
M10 Kit-C, K.2-LOC LockOut Cover
K12.2 Yoke