Pioneer DDJ 800 & ProX XS-DDJ800 WLTBL Package

Stop worrying about MCs walking in front of the speaker thanks to the compatible Feedback Reducer feature in rekordbox dj. The system will automatically bring down the 'howling' sound from the mic - extra handy when you have 2 microphones plugged in at once. Use the DDJ-800 to mix audio from external sources, and apply Sound Color FX, Beat FX, EQs and Trim to make all of your shows unique.

KEY FEATURES

COMPACT AND PORTABLE

Though it feels like our advanced DDJ-1000 DJ controller, the DDJ-800 is 1.3 kg lighter so you can comfortably transport it between events.

JOG DISPLAY

Keep your eyes on the deck and off your computer thanks to the customizable Color LCD On Jog Display located in the centre of each jog wheel. Reveal only the information you need, whether that's BPM, waveform, playback position or Hot Cue and Loop points.

FEEDBACK REDUCER

Enjoy peace of mind when you hand the mic to guest speakers and MCs. The Feedback Reducer feature in rekordbox dj will instantly detect and reduce the 'howling' sound of microphone feedback so you'll remain in complete control of the audio.

CLUB-STYLE LAYOUT

Performing on the DDJ-800 feels like you're using a professional NXS2 set-up. The controller's buttons, knobs and faders are arranged in the same way as those on our club-standard CDJ and DJM gear.

AUDIO MIXER FEATURE

Use the DDJ-800 as a mixer to control the volume of audio from an external device - even when you're using it on its own - by adjusting the trims, channel faders and EQs. And, when connected to rekordbox dj, you can use Sound Color FX and Beat FX too.

Specification:

Main Features

• Auto Standby: Yes
• Included DJ Software: rekordbox dj
• DVS Control: rekordbox dvs (not included)
• Software System Requirements: Mac
  macOS Mojave 10.14 (Updated to the latest version)
  macOS High Sierra 10.13 (Updated to the latest version)
  macOS Sierra 10.12 (Updated to the latest version)
• Windows
  Windows® 10/ 8.1/ 7 (latest service pack)

Specifications

• Width: 632 mm
• Height: 69.7 mm
• Depth: 334.5 mm
• Weight: 4.7 kg
• Soundcard: 24 bit/44.1 kHz
• Frequency Range: 20 - 20000 Hz
• Signal-to-Noise Ratio: 111 dB
• Distortion: < 0.003 % (USB)

Performance Control:

• Channels: 2
• Deck Control: 4 / Dual
• Jog Wheel
• Color on jog display: Yes
• Feeling Adjust: Yes
• Pad FX: Yes
• Beat FX: Echo
  Multi Tap Delay
  Spiral
  Reverb
  Trans
  Flanger
  Phaser
  Pitch
  Slip Roll
  Roll
  ENIGMA JET
  MOBIUS (SAW)
  MOBIUS (TRIANGLE)
  LOW CUT ECHO
• Sound Color FX: Dub Echo
  Filter
  Noise
  Pitch
• Sampler: 16slot x 4bank
• Hot Cues: 16
• Auto Beat Loop: Yes
• Beat Jump: Yes
• Slip Mode: Yes
• Talkover Function: Yes
• Feedback Reducer: Yes
• EQ Isolator: Yes

Fader

• Fader Start: Yes
• Crossfader Curve Adjust: Yes

Terminals

• Inputs : 2 PHONO/LINE (RCA)
  2 MIC (XLR & 1/4 inch TRS Jack, 1/4 inch TRS Jack)
  1 AUX (RCA)
• USB: 1 USB B port
• Outputs: 2 MASTER (XLR, RCA)
  1 BOOTH (1/4 inch TRS Jack)
  2 HEADPHONE MONITOR (1/4 inch Stereo Phone Jack, 3.5mm Stereo mini-jack)

ProX XS-DDJ800 WLTBL

ProX XS-DDJ800 WLTBL Flight Case For Pioneer DDJ-800 Digital Controller W-Sliding Laptop Shelf and Wheels & 1U Rackspace-Black on Black

The ProX XS-DDJ800 WLTBL Road Case with a sliding laptop shelf is designed by ProX Cases for the Pioneer DDJ-800 Digital DJ Controller and is made with the highest quality material and workmanship to give you the ultimate security for your controller. If you have a passion for your gear and want to keep it safe at all times, this case will perform at the highest level every time.

The XS-DDJ800 WLTBL is constructed with 3/8-inch plywood, which provides a unique look. It has reinforced steel ball corners for protection and easy stacking as well as recessed rubber grip steel handles and butterfly twist latches which are recessed to protect them from damage during transport. There is additional space for cables and small accessories in the back and underneath the unit for convenience, as well as a removable front panel for you to easily access the front controls and headphone/mic jacks.

It's all about the options! This item is part of our Black on Black series, which features a black finish with black hardware for a sleek, professional look. There's no going back. This stunning road case for your professional gear will always make a statement.

This ProX ATA 300 Style Flight case is manufactured with the Honeycomb Digital™ laminated surface design on 3/8" plywood. Made with the super-sleek look of Honeycomb Digital™ hexagon grids on all shell surfaces, which gives the cases an almost alien look! Also as opposed to regular laminated plywood cases from other manufacturers, the ProX Honeycomb Digital™ design helps prevent minor to mild scratches. The Honeycomb Digital™ line design was inspired in 2009 by the design of New York City Street Manhole covers which are made to handle rough and tough everyday punishment.

All ProX cases use CNC technology, during the manufacturing process, to assure that cases are consistently built with strict specifications and tolerances that are required for the high-quality standards that ProX cases have been known for since 1984.

Note: Any pictured device is shown for reference only and not included!

For your safety, and the safety of your equipment, do not attempt to transport or move with any gear stored on a sliding shelf or side shelf and be aware that the sliding shelf can be removed when slid out to its furthest point.

Features

ProX has been manufacturing flight cases since 1984 and are designed to protect your investment

• ATA-300 Style Flight/Road Case
• Removable Sliding Laptop Shelf
• Four Industrial Grade Rubber Feet
• ProX Premium Black on Red Design
• Signature Honeycomb Digital™ Laminated 3/8" Plywood
• *High-density Foam Interior Support & Casing
• ProX Branded Spring Action Rubber Grip Recessed Handles
• Easy Locking Fit Aluminum Tongue and Groove
• Cable Access Hole with Removable Emblem Cover
• ProX Live Performance Gear® Limited Lifetime Warranty (Click for Details)
• ProX Heavy and Powerful Steel Ball Corners & Dual Anchor Rivets
• ProX Branded Industrial Recessed Butterfly Twist-Lock Latches - Padlock Ready
• Featuring A Bottom 1U 19" Rack Mount Space Below Controller (Incl. Rack Rails)
• Rack Rails Can Be Positioned for Front or Rear Mounting
• ?High-density foam interior support & casing

* ProX Goes Green: The durable hard rubber foams used in our cases contain 85% recycled content. Of that 70%, 80% of it comes from recycled plastic bottles and the remaining 20% from recycled post-industrial material. At ProX we strive to make the world a better place!

Specification

To Fit

• Pioneer DDJ-800 Digital Controller

• Dimensions: 29.00"L x 9.00"W x 19.50"H
• Weight: 35.00 lbs
• Shipping Dimensions: 31.00"L x 11.00"D x 22.00"H
• Shipping Weight: 41.00 lbs