Pioneer DDJ-400 and QSC CP12 with Odyssey FRGSPIDDJSB Package

Features:

Club-style layout

The DDJ-400's buttons and knobs are arranged in the same way as those on our professional NXS2 set-up. Develop your skills using an interface similar to that of our club-standard player, and enhance your mixes with Sound Color FX and Beat FX featuring curves taken from our DJM-900NXS2 mixer. You'll soon feel comfortable performing in DJ booths.

Beat FX

Apply professional FX that match the tempo of the track that's currently playing by using the Beat FX feature. This will help you craft unique sets even if you're just starting out.

rekordbox dj

You get a rekordbox dj licence key bundled with this controller. Simply activate your licence key for our DJ software, connect the controller and start DJing.

PC Master Out

For flexibility you can choose to hear your mix through your computer's internal speakers or connected desktop speakers. At the same time, you can use your headphones to cue independently of the master out.

Plug and play

With a built-in sound card, simply connect the controller to your computer using the provided USB cable to power up and begin playing.

Specifications:

• USB Bus Powered: Yes
• Plug and Play: Yes
• Included DJ Software:rekordbox dj
• Width:482mm
• Height:58.5 mm
• Depth:272.4mm
• Weight:2.1kg
• Soundcard:24 bit/44.1 kHz
• Frequency Range:20 - 20000 Hz
• Signal-to-Noise Ratio:103 dB
• Distortion:< 0.005 % (USB)

Performance Control

• Channels:2
• Deck Control:2
• Pad FX:Yes
• Filter:High & Low Pass filter
• Sampler:16slot x 4bank
• Hot Cues:8
• Manual Loop:Yes
• Beat Jump:Yes

Fader

• Fader Start:Yes
• Crossfader Curve Adjust:Yes

Terminals

• Inputs:1 MIC (1/4 inch TS Jack)
• USB:1 USB B port
• Outputs:
  • 1 MASTER (RCA)
  • 1 HEADPHONE MONITOR (Mini-jack)

QSC CP12

High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performances. The CP Series follows in that same tradition while also offering an ultra-compact form factor and class-leading value.

Features

• Compact and powerful performance
• 1000 Watt peak power Class-D amplifier module
• Easily selected contours for commonly-used applications
• Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
• Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
• Light weight and highly portable
• Professional appearance looks great in any application
• Use for main PA, stage monitor, or instrument amplifier
• 35 mm pole socket
• Optional yoke, tote, and outdoor cover accessories
• Complete EASE and CAD information available online
• 3-Year Warranty*

The 1000 Watt (peak) power module delivers ample burst and continuous power for the loudspeaker's matching transducers. Convection cooling provides heat dissipation, even in extreme climates, while contributing no additional background noise. Carefully tailored, subtle and sophisticated dynamics processing is used to protect the drivers from damage and the performance from distortion. The result is a highly accurate and musical sound that maintains full signal integrity, even when pushed to high SPL.

CP produces a big sound from a small package. Ultra-compact and remarkably light weight, CP is easy to load, carry, lift and deploy in a wide range of portable and installed applications.

CP presents a compact, unobtrusive and stylish appearance that looks great in a wide range of applications. Both models can be utilized as either main PA (with included pole mount), floor monitor or installed via optional quick-connect yoke mount.

CP provides one-touch access to preset contours for the most commonly-used applications including Default (Full-Range), Default with External Subwoofer, Dance, Dance with External Subwoofer, Floor Monitor and Speech.

Specification

• Configuration Two-way active loudspeaker
• LF Transducer: 12 in (305 mm), cone
• HF Transducer: 1.4 in (35.6 mm) compression driver
• Frequency Response (-6 dB) 49 - 20 kHz
• Frequency Range (-10 dB) 47 - 20 kHz
• Nominal Coverage Angle: 75° Axisymetric
• Maximum Rated SPL1: 126 dB
• Amplifier: Class D
• Peak: 800 W (LF), 200 W (HF)
• Controls: Power
• 2 x Gain
• Mic Boost Push Switch
• 6-way Contour Selection Switch
• Indicators: Power LED
• 2 x Input Signal LED
• Input B MIC selected LED
• Limiter active LED
• Connectors: 2 x locking XLR/F ¼" combo (Line Input and Mic/Line input)
• 1 x 3.5 mm TRS (Stereo Input)
• 1 x XLR/M (Mix Output)
• 1 x IEC power connector
• AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
• AC Power Consumption 1/8th Power: 100 VAC, 0.75A / 120VAC, 1.0A / 240VAC 0.31A
• Enclosure Material: Polypropylene
• Attachment Points: M10 threaded insert
• Color: Black (RAL 9011)
• Grille: 18 Gauge powder-coated steel
• Dimensions (HxWxD): 20.3 x 13.8 x 12.7 in
• 516 x 350 x 323 mm
• Net Weight: 30.3 lbs (13.7 kg)
• Shipping Weight: 36.3 lbs (16.5 kg)
• Regulatory: EMC, UL, CB

Odyssey FRGSPIDDJSB Description

FLIGHT READY® PIONEER DDJ-SB / NUMARK MIXTRACK PRO II DJ CONTROLLER CASE

Odyssey presents the Flight Ready® FRGSPIDDJSB case featuring our patented Glide Style™ gear platform, great for positioning laptops, tablets, effect processors, and other performance essentials where you want over the controller. Specifically made for the Pioneer DDJ-SB and Numark Mixtrack ProII controllers, it also has a unique design featuring an extra wide controller compartment that allows easy access to the side controls and headphone/mic jacks. A spacious ventilation pit under the controller is ideal for storing cables and other accessories. A version without the top glide platform is also available(FRPIDDJSB).

Features:

• Patented Top Glide Style™ Platform
• Bottom Cable Port Perfect for Clean Cabling
• Heavy-Duty Ball Corners and Recessed Latched
• Spring-Loaded Handle for Convenient Transport
• Adjustable Controller Compartment Foam to Custom Fit the DDJ-SB or Mixtrack Pro II Controllers
• Controller Compartment Section Dimensions Including Side Access Space: 22"W x 3"H x 10"D
• Plenty of Cable Management Space Underneath & Behind the Controller
• Bottom Storage/Ventilation Pit Space: 13"W x 1.75"H x 10"D
• Limited Lifetime Warranty

Specifications:

• Approximate Dimensions (exterior): 25.5"W x 8"H x 15.25"D
• Approximate Weight: 19 lbs
• Approximate Shipping dimensions (exterior): 26.5" x 8.75" x 16"
• Approximate Shipping weight: 22 lbs

What's in the Box:

This Package Includes:

• (1) Pioneer DDJ-400
• (2) QSC CP12 Speaker
• (1) Odyssey FRGSPIDDJSB
• (2) Carry Tote Bags for QSC CP12 Speakers
• 1 X Tripod Pair w/ Carry Bag
• 2 X XLR Cable