Peavey SP 4P 2x15 inch Quasi 3-Way PA Speaker

Overview

The Peavey® SP®4P is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. This quasi-three-way powered system is comprised of a 1000 W peak switching power amplifier driving a pair of 15" Black Widow® BWX series woofers, now with a long throw voice coil. The 2" RX™22CT titanium diaphragm compression driver is driven by a 500 W peak switching power amplifier, and is coupled to a low coloration waveguide with a coverage pattern of 100° horizontal by 50° vertical.

The SP®4P is capable of up to 131 dB peak SPL. The enclosure is constructed of plywood augmented with internal braces, covered with a textured black painted finish. The shape is a trapezoidal form, with a full-length coated perforated steel grille, to offer an attractive yet durable powered speaker system. A pair of four-way inset handles, one on each side, and a set of casters on the bottom rear edge and a top rear handle provide convenient transport and handling. Multiple fly points are provided to allow overhead rigging. The cabinet and grille are black.

Two independent mixed input channels each offer a balanced input to the preamp/EQ electronics, and a level control. Each channel has one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Channel 2 has a 3.5 mm media jack added. A line out section has male XLR connectors. The Thru outputs allow linking of additional speaker systems, or feed of the signal to a powered subwoofer, etc.

The power amplifiers providing the bi-amplification are low-distortion switching units providing 1000 W peak available power into the nominal 4 ohm load of the woofer, and a 500 W peak available power into the nominal 8 ohm load of the tweeter. The power supply for both amps is a switch mode type for low weight and high efficiency. Both amplifiers feature our DDT™ compression, which virtually eliminates audible power amplifier clipping. Cooling is via forced air circulation.

The combination of the Black Widow® BWX woofer with the RX™22CT tweeter and DSP crossover and EQ provide a clarity and impact beyond conventional powered enclosures. The switching power amps and switch-mode power supply, along with the professional grade speaker components, provide this high level of technological sophistication at a very light weight, while at a very reasonable cost.

Features:

• Bi-amplified Powered Speaker System
• Eq Presets Available Via Rotary Encoder Pushbutton Select
• 9-band Eq And Other System Settings Accessed Via Rotary Encoder Pushbutton Select
• Dynamic Bass Boost Function
• Up To 150 Ms Of Architectural Delay
• Dsp Based Crossover, Limiting And Eq
• Two Independent Mixed Input Channels, With Gain Control And Mic/Line Gain Switch
• Each Channel Features A Combo Jack With 1/4" Trs & Female Xlr Balanced Input
• Input 2 Has A 3.5 Mm (1/8") Stereo Media Input Jack
• Output Connectors Are Male Xlr
• Four-way Inset Handles On Each Side
• Peak Spl Up To 131 Db With Music!
• Tilt-back Casters And Top Rear Back Handle
• Peavey Rx™22Ct Compression Driver Tweeter On A Quadratic Throat Waveguide
• Full Length Perforated Steel Grille
• Two 15" Black Widow® Bwx Woofers
• Rugged Plywood Enclosure, With Bracing And Dado Construction
• Both Power Amps Have Ddt Compression
• Reduced Weight - Only 93 Pounds!
• 1000 Watts Peak Available Woofer Power, 500 Watts Peak Available Tweeter Power
• Multiple Fly Points
• Fan Cooled For Maximum Reliability

Specifications:

• Weight Unpacked: 104.72 lb(47.5 kg)
• Weight Packed: 109.13 lb(49.5 kg)
• Width Packed: 19.688"(50.00752 cm)
• Height Packed: 47.25"(120.015 cm)
• Depth Packed: 19.688"(50.00752 cm)