BASSBOSS SSP118-MK3 Single 18" Powered Active Subwoofer

The SSP118-MK3 Single 18" Powered Subwoofer gives you low frequency output to 30 Hz, typical of an average Double 18", from a single 18" box. Delivering output to frequencies lower than many double 18" cabinets, each individual SSP118-MK3 does so in about half the space and considerably less weight. This is a very practical consideration from both a size and cost point of view. If you're a Mobile Professional who strives to provide superior sound quality, the SSP118-MK3 allows you to deliver premium service using less equipment and with less labor. With two SSP118-MK3 Subwoofers, you will have the output of one of the worlds finest Double-18" subwoofers, the BASSBOSS SSP218, divided into two smaller, more manageable pieces. The cabinets are constructed from 18mm marine-grade Birch plywood. The cabinet is extensively braced and construction features dado and rabbet joinery throughout, so all seams are interlocked and the cabinet is ultra-rigid. The cabinet is finished in an extremely rugged, black polyurea coating and the driver is protected by a black, powder-coated, perforated steel grille.

The SSP118-MK3 features a 2500W amplifier with an auto-sensing, globally compatible power supply that can run on mains supplies anywhere between 90 and 250 Volts. Full output power is available on anything over 110V. The amplifier's high peak-output voltage provides for intense high SPL hits while its sustained output is unparalleled in its ability to deliver the liquid lows. The amplifier is passively cooled via its external heat-sink and by woofer-generated air-flow through the ports. When necessary, two blower-fans will engage to provide additional forced-air cooling capacity in more extreme conditions.

Features:

• SSP118-MK3 Single 18" Powered Sub
• Sets the standard for mobile professionals seeking superior sound quality.
• For Mobile Professionals who pride themselves on providing superior sound quality, the SSP118-MK3 allows you to deliver premium service with less equipment and labor.
• There are all-new amplifiers in the MK3 series.
• Total power has increased, however power allocated to woofers increased substantially.
• The higher output voltages provide more impact.
• Universal input voltage compatibility of 90-250V provides more flexibility.
• Waterproof connections provide more peace-of-mind.
• The MK3 features an all-new 96kHz DSP.
• The pushbutton presets have doubled, from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN.
• The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters, as well as multiple protection systems and limiters to prevent driver overload in as many ways as possible.
• ControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups.
• The latest in DSP programming developments can be added via easy remote updating.

Specifications:

• Loudspeaker Description: Single 18" Self-Powered Vented Direct-Radiating Subwoofer
Frequency Response (±3 dB): 30 - 100Hz
• Maximum Sustained Output: 130dB
• Max SPL (Peak)*: 133dB
• Nominal Dispersion (H° x V°): 360 x 360 - Cardioid Mode Available with Multiple Boxes
• Amplification: 2500 Watts Class D
• Processing: Integrated comprehensive DSP. 96kHz sampling rate with 8 push button presets. All presets include high pass filters, low pass filters, phase alignment, equalization and multi-stage limiting. Storage capacity for up to 100 presets
• Electrical Connector Amp: Neutrik powerCON True 1 TOP IP65 rated waterproof connectors
• Electrical Connector Mains: Standard US 3-pin grounding 120V electrical plug: NEMA 5-15 (Edison)
• Voltage Operating Range: 100-240V AC, 50-60Hz (Auto-sensing, auto switching universal supply)
• Current Draw 120V: 4.6 Amps (Nominal)
• Current Draw 240V: 2.3 Amps (Nominal)
• Signal Input Connector: XLR-F
• Signal Output Connector: XLR-M (direct pass-through only)
• Enclosure Type: Direct radiating, vented enclosure, optimally tuned for low frequency response with high sensitivity and high power handling
• Transducer Low Frequency: 1 x 18 in. diameter (457mm) neodymium motor woofer with 4.5 in. (115mm) voice coil
• Cabinet Construction: CNC machined 18mm Birch plywood with extensive bracing and dado joinery. 4 integrated handles. 1 x 35mm steel pole socket. 4 rubber feet. 4 interlocking foot pockets. 8 X M10 threaded flypoints
• Exterior Finish: High-pressure, bonded polyurea coating. Rugged, waterproof. Textured black
• Grille: Perforated, powder-coated steel
• Dimensions (HxWxD): 22.5 in. x 30 in. x 24 in. (23.25 in. high with feet)
• Net Weight: 125 lbs
• Shipping Weight: 140 lbs
• What's Included: Loudspeaker, 15' (5m) Power Cable, Manual, Warranty Card
• Optional Covers: Heavy-duty padded nylon transport cover
• Optional Dollies: Birch plywood flat cart with foot pockets to accept the cabinet feet, 4 handles and 4 heavy-duty locking casters. Transports up to 3 stacked cabinets.
• Optional Hardware: M10 Shoulder Eye Bolts, M10 Side-Pull anchors
• True Specifications: BASSBOSS' forward-thinking approach means that they never rest on their laurels. As they continue to innovate and refine their technology, BASSBOSS' specifications will evolve. They're committed to constantly pushing the boundaries and raising the bar.

What's in the Box

• (1) BASSBOSS SSP118-MK3 Single 18" Powered Active Subwoofer
• (1) 15' (5m) Power Cable
• (1) Manual
• (1) Warranty Card