Eliminatrix 650W Colorkick Sparklers

Description

The Eliminatrix 650W Colorkick Sparklers is a DMX-controllable device that can project a 3 to 16-foot fountain of cold sparks.  (62 degrees F) The device is a compact rectangular metal unit with a control surface on the rear with powerCON in and pass-thru connectors for daisy-chaining units together.  There’s also a power switch and 3-pin DMX In and Out connections. The panel on the back is an LED screen with button controls that give the user intensity options.   It has a connector for the wireless remote control receiver as well.

The machine is operated from a DMX console or Eliminatrix wireless remote.  The operator can control the height and the volume of sparks, by adjusting DMX values. The operator has full control over the start and stops of the effect, which means that for any reason, at any time, the technician can abort the program or halt an effect immediately. Chases, effects, bumps, and any other programming tricks can be used with the Cold Spark Machine, just like any DMX connected fixture. Each machine runs on 110-120VAC and is rated at 5.8A of power.

Developed by Eliminatrix to fit the needs of the mobile entertainer and production companies, the machine works by heating up small grains of a proprietary mixture of metals, which are loaded into the machine from small pre-measured pouches.  Every 7 ounces (200-gram) packet gives the operator apEliminatriximately 10 to 15 minutes of firing time, in 90-second increments with a cooldown time, which means no reloading the device after a single shot. These grains produce cool-to-the-touch sparks, and there is no possibility of igniting a fire as it does not use flames or gunpowder. The effect also produces virtually no smoke, and leaves no foul odor in the air, making this a great effect for indoor use.