K Pack

Overview

• Two QSC K12 Speakers
  • 1,000 watt, efficient and lightweight class-D power module
  • Lightweight (41 lb.)
  • Professional appearance and rugged construction
  • Directivity Matched Transition (DMT) and Intrinsic Correction DSP tuning for accurate, undistorted performance across the entire sound field
  • GuardRail technology discreetly protects the system from damaging overload
  • DEEP mode for enhanced low-frequency extension without a subwoofer
  • Locking IEC power cable
  • XLR and 1/4" connectors
  • Phone Mic/Line and Line inputs with Loop-thru connectors and independent level controls.
  • Phono (RCA) inputs
  • Three 2-way models容ach with coverage pattern optimized to match the LF driver
  • Front mounted LED may be switched off or indicate "LIMIT" or AC Power On
  • Dual angle, 35 mm pole socket with Tilt-Direct allows the speaker to be angled down to put the energy on the audience instead of the back wall
  • 1-3/4" voice-coil compression driver
  • High Pass Filter for use with subwoofers
  • 1,000 watt subwoofer, efficient and light-weight Class D power module
  • Threaded pole socket for solid, secure pole mounting
• Two QSC KSUB Subwoofers
  • 1,000 watt Class D power module
  • Professional appearance and rugged construction
  • GuardRail technology discreetly protects the system from damaging overload
  • Locking IEC power cable
  • XLR and 1/4" connectors
  • Phone Mic/Line and Line inputs with Loop-thru connectors and independent level controls.
  • Phono (RCA) inputs
  • Front mounted LED may be switched off or indicate "LIMIT" or AC Power On
  • High-Pass Filter
  • Dual 12" band-pass for compact size, efficiency and high-power handling
• Furman M-8X Power Conditioner
  • Maximum Output Current: 15 amps
  • Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug
  • Operating Voltage: 120VAC 60Hz
  • Spike Protection Mode: Line to neutral
  • Energy Dissipation: 170 joules
  • Peak Impulse Current: 12,000 amps
  • Maximum Continuous Opterating Voltage: 130 VAC RMS
  • Let Through Voltage (@ 125 amps, 8/20uS waveform) 400 volts
  • Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 Mhz
  • Dimensions: 1.75" H x 19" W x 7.5" D
  • Weight: 4.9 lbs.
  • Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
• DBX DriveRack PX Speaker Optimizer
  • Stereo feedback elimination with 12 feedback notch filters
  • Dual 28-band graphic EQ
  • Classic dbx Compressor
  • 120A subharmonic synthesizer
  • Stereo multi-band parametric EQ
  • Stereo PeakStopPlus limiters
  • Pink noise generator
  • Auto-EQ with 28-band RTA
  • JBL and other popular powered speakers included in Setup Wizard
  • dbx M2 measurement mic and zippered pouch included
  • Front panel RTA-Mic XLR input with phantom power
  • 25 user programs / 25 factory programs
  • 2-channel XLR Input
  • 2-channel XLR Output
  • 2-channel XLR Sub Output
  • 24-bit ADC/24-bit DAC, >110 dB dynamic range
  • dbx Type IVTM conversion system
  • Full graphic LCD display
• Two Speaker Poles
• FREE Speaker Cables!