The DM2050 is a compact, 3-channel tabletop mixer designed for today’s turntablist, desktop, and aspiring DJ. Featuring steep 3-band EQ on every channel, a replaceable crossfader with reverse and slope control, a dedicated microphone input with 2-band EQ, and multiple input sources, this entry-level mixer is big on features and easy on the wallet.

• PDF Quickstart Guide
• Inputs for 4-6 lines switchable, 2 phono inputs, and a microphone
• Steep 3-band EQ on every channel with rotary frequency kills
• Dedicated microphone input with control for treble, bass, and level
• Replaceable crossfader with reverse and slope control
• Six segment LED display for monitoring signal strength
• Toggle for master and pre-fader listen (PFL) metering
• Inputs:
  Line: 10K ohm input impedance; 80mV RMS sensitivity for 0dB output
  Mic: 600 ohm input impedance unbalanced; 1.5mV RMS sensitivity for 0dB output; 400mV RMS max input
  Phono: 47Kohm input impedance; 1.3mV RMS sensitivity @ 1KHz for 0dB output
• Outputs:
  Line: 7V RMS max
  Headphone: 0.5W into 47ohm
• Signal to Noise Ratio (maximum output JIS-A weighted):
  Line: Better than 100dB
  Mic: Better than 95dB
  Phono: Better than 85dB
• Distortion: Less than 0.05%
• Frequency response:
  Line: 20-20KHz +/-0.5dB
  Mic: 20-15KHz +/-0.5dB
  Phono: +/-1dB except for controlled attenuation of -3dB @ 20Hz to reduce rumble and feedback
• Channel Equalizer:
  Bass: +12/-35dB at 20Hz
  Middle: +12/-25dB at 1.3KHz
  Treble: +12/-20dB at 15KHz
• Channel fader kill: Better than 90dB at 1Khz
• Crossfader kill: Better than 75dB
• Crosstalk: Better than 80dB at 1KHz